3DSolex Printcore Tri-X

 179,00

The 3DSolex Printcores are available in different configurations.

Click here to see variants and purchase..

The 3DSolex Printcores are preprogrammed with the correct nozzle size,
-except Printcore 4,7, and Black, which are all AA 0.40. Here you must
change line width in Cura to reflect nozzle size. also layer height and speed if necessary.

Printcore BB ships with 2 nozzles

Printcore  AA Tri-X –  0.25 – 0.80  ships with 3 nozzles in the same size!
You can always supplement nozzles in all sizes later.

The other kits have various nozzles!

Every nozzle can now be easily replaced! Micro nozzles and Everlast Sapphire nozzles available. 12 Month Guarantee on electronics, heater, temp sensor. (Nozzles are consumables, but can now be changed easily and inexpensively!)

SKU: test008 Categories: ,
  • Description

    Description

    The 3DSolex Printcore is a drop-in replacement for the standard Print Core AA. We add 12 month guarantee*. 3DSolex Printcore ships with tools for nozzle change and 3 x 0.40 Nozzles

    There are the following  configurations available:

    Printcore Tri-X 25 :   3 x 0.25 mm Matchless nozzle.

    Printcore Tri-X 40 :   3 x 0.40 mm CHT Matchless nozzle.

    Printcore Tri-X 80 :   3 x 0.80mm CHT Matchless nozzle.

    Printcore Nozzle nozzles available separately:

    0.10mm Sub Micro Nozzle Coated Brass ( world`s smallest)
    0.15mm Micro Nozzle Coated Brass
    0.25mm  Coated Brass + ICE
    0.40mm  Coated Brass + ICE
    0.50m STEEL +  ICE nozzle
    0.60mm   Coated Brass + ICE
    0.80mm  Coated Brass + ICE
    1.00mm  Coated Brass  + ICE

    3DSolex Printcore EVERLAST Ruby Sapphire Nozzles

    0.25mm
    0.40mm
    0.50mm
    0.60mm
    0.80mm
    1.20mm

    These are superhard nozzles, which print just as fast as the other non-steel nozzles, but will not be destroyed by abrasive filaments.

    Additional information

    All parts are surface hardened (not Steel nozzle) and of exceptional quality. Each nozzle is a tiny little masterpiece and of a uniquely high build quality ( not 0.50 mm SS which is a standard nozzle). We are pressing the prices down to a reasonable level, you and your printer deserve it! Warning: The nozzles will not fit any other block. The Printcore can only use these nozzles. Mixing other nozzles/ blocks will destroy both block and nozzle. Guarantee does not cover destroyed Block / nozzle due to threading failure. * Guarantee: The Core is classified as a consumable. This means that much like tires on a car it wears out quickly or slowly depending on use. However; we introduce a limited guarantee for our Printcore customers. Since we carefully verify every Printcore we offer the following guarantee:  If you cannot yourself resolve Printcore problems you pay shipping to us + 49E, we fix ANY Printcore problems. While at it, we install a new PTFE and tracked return shipping (15E). How can you loose?

    The following part comes with a 12 month guarantee*.

                    It replaces this, with the exception that it does take a little longer to replace a nozzle than to replace the whole core.

  • Additional information

    Additional information

    Weight 0,15 kg
    Dimensions 15 × 10 × 3 cm
    Choose Version

    Tri-X 25, Tri-X 40, Tri-X 80

  • FAQ

    No FAQ Found