iconNew Products
Bowden PTFE Tube & Clips S5 Single
Twin pack
Fits Ultimaker -S5
PTFE, Super-Slippery. Not transparent.
Bowden Tube and Clips for S5 .
-
€ 25,00Add to basket
Bowden PTFE Tube & Clips S5 Single
Twin pack
Fits Ultimaker -S5
PTFE, Super-Slippery. Not transparent.
Bowden Tube and Clips for S5 .
€ 25,00Add to basket
Bowden PTFE Tube & Clips S5 & UM3/UM2 TWIN PACK
Twin pack
Fits UM2-UM3-S3-S5
PTFE, Super-Slippery. Not transparent.
Bowden Tube and Clips for S5 and UM3-UM2.
-
€ 39,00Add to basket
Bowden PTFE Tube & Clips S5 & UM3/UM2 TWIN PACK
Twin pack
Fits UM2-UM3-S3-S5
PTFE, Super-Slippery. Not transparent.
Bowden Tube and Clips for S5 and UM3-UM2.
€ 39,00Add to basket
Raise3D PRO 2 Nozzle 25-40-80
3 pcs 3DSolex Nozzle for Raise3D PRO 2.
Sizes in kit are :
1 x 0.25 mm
1 x 0.40 mm
1 x 0.80mm
Coated Brass. These are quality nozzle to fit your PRO 2
-
€ 59,00Add to basket
Raise3D PRO 2 Nozzle 25-40-80
3 pcs 3DSolex Nozzle for Raise3D PRO 2.
Sizes in kit are :
1 x 0.25 mm
1 x 0.40 mm
1 x 0.80mm
Coated Brass. These are quality nozzle to fit your PRO 2
€ 59,00Add to basket
UM3 – S5 Hardcore Black 40-60-80 Everlast
2 x Hardcores
6 x Standard ICE Nozzles: 3 x 0.40, 3 x 0.80
2 x EVERLAST Ruby Nozzles: 0.40 + 0.60
PRINT ALMOST ANY MATERIAL WITH RUBY!
Bought separately at 525,- Eur,
Kit ships with 2 cores:
Hardcore 0.40 + Hardcore 0.80
3 x 0.40 Nozzles
3 x 0.80 Nozzles
Kit ships with 2 Everlast Nozzles:
1 x 0.40mm Everlast
1 x 0.60mm Everlast (note.. ships with 0.60mm, not 0.80mm)
Many other sizes available!
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)
-
€ 499,00€ 444,00Add to basket
UM3 – S5 Hardcore Black 40-60-80 Everlast
2 x Hardcores
6 x Standard ICE Nozzles: 3 x 0.40, 3 x 0.80
2 x EVERLAST Ruby Nozzles: 0.40 + 0.60
PRINT ALMOST ANY MATERIAL WITH RUBY!
Bought separately at 525,- Eur,
Kit ships with 2 cores:
Hardcore 0.40 + Hardcore 0.80
3 x 0.40 Nozzles
3 x 0.80 Nozzles
Kit ships with 2 Everlast Nozzles:
1 x 0.40mm Everlast
1 x 0.60mm Everlast (note.. ships with 0.60mm, not 0.80mm)
Many other sizes available!
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)
€ 499,00 € 444,00Add to basket
Raise3D PRO 2 Nozzle
3DSolex Nozzle for Raise3D PRO 2.
Sizes available are 0.25-0.40-0.80mm.
Coated Brass. This is a fantastic quality nozzle to fit your PRO 2.
-
€ 16,00Select options
Raise3D PRO 2 Nozzle
3DSolex Nozzle for Raise3D PRO 2.
Sizes available are 0.25-0.40-0.80mm.
Coated Brass. This is a fantastic quality nozzle to fit your PRO 2.
€ 16,00Select options
Raise3D PRO 2 Everlast Ruby Nozzle
Raise3d PRO: Super hard and super fast nozzles for Raise3D PRO 2 ONLY!
You can now print almost any abrasive material on your Raise3D PRO
Almost forever!
-
€ 69,00Select options
Raise3D PRO 2 Everlast Ruby Nozzle
Raise3d PRO: Super hard and super fast nozzles for Raise3D PRO 2 ONLY!
You can now print almost any abrasive material on your Raise3D PRO
Almost forever!
€ 69,00Select options
Prusa I3 MK3 Nozzle Changer Tools
Tools to change nozzles on your Prusa I3 Mk3.
Steel-tool and socket only.
-
€ 3,00Add to basket
Prusa I3 MK3 Nozzle Changer Tools
Tools to change nozzles on your Prusa I3 Mk3.
Steel-tool and socket only.
€ 3,00Add to basket
Prusa I3 Nozzle
* These fantastic Nozzles allow up to 30 cubic/mm per second by changing the Nozzle Only!
-
€ 12,00 – € 14,00Select options
Prusa I3 Nozzle
* These fantastic Nozzles allow up to 30 cubic/mm per second by changing the Nozzle Only!
€ 12,00 – € 14,00Select options
iconBestSeller
3DSolex RSB Nozzle 0.25-0.80mm for 2.85
Standard Nozzle. High quality. Made in Norway. If your print crashes, you cannot blame it on this nozzle, it is likely something else.
-
€ 8,00Select options
3DSolex RSB Nozzle 0.25-0.80mm for 2.85
Standard Nozzle. High quality. Made in Norway. If your print crashes, you cannot blame it on this nozzle, it is likely something else.
€ 8,00Select options
S5 – UM3 Hardcore
Hardcore replacement of up to 8 original Print Cores: – Nozzles: 0.10mm – 1.2mm.
Every nozzle can now be easily replaced! Micro nozzles and Stainless nozzles already in programme, fantastic new additional products coming up on the coming weeks! –
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)
-
€ 189,00 – € 289,00Select options
S5 – UM3 Hardcore
Hardcore replacement of up to 8 original Print Cores: – Nozzles: 0.10mm – 1.2mm.
Every nozzle can now be easily replaced! Micro nozzles and Stainless nozzles already in programme, fantastic new additional products coming up on the coming weeks! –
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)
€ 189,00 – € 289,00Select options
TFN PTFE Coupler UM2/+
Improved PTFE part for UM2/+. A very handy spare part to have.
-
€ 15,00Select options
TFN PTFE Coupler UM2/+
Improved PTFE part for UM2/+. A very handy spare part to have.
€ 15,00Select options
Bowden PTFE Tube & Clips UM2-UM3
New and updated quality. PTFE, Super-Slippery. Not transparent.
Bowden Tube and Clips for UM2 and UM3 . Length 2 cm + (allows you to take a new “grip” by cutting a little).
-
€ 18,00 – € 25,00Select options
Bowden PTFE Tube & Clips UM2-UM3
New and updated quality. PTFE, Super-Slippery. Not transparent.
Bowden Tube and Clips for UM2 and UM3 . Length 2 cm + (allows you to take a new “grip” by cutting a little).
€ 18,00 – € 25,00Select options
50W Heater UM2/+
Individually tested heater cable. We know how horrible it is to change it.
1 Year guarantee. Not for use on clone blocks.
-
€ 33,00Add to basket
50W Heater UM2/+
Individually tested heater cable. We know how horrible it is to change it.
1 Year guarantee. Not for use on clone blocks.
€ 33,00Add to basket
Raise3D PRO 2 Everlast Ruby Nozzle
Raise3d PRO: Super hard and super fast nozzles for Raise3D PRO 2 ONLY!
You can now print almost any abrasive material on your Raise3D PRO
Almost forever!
-
€ 69,00Select options
Raise3D PRO 2 Everlast Ruby Nozzle
Raise3d PRO: Super hard and super fast nozzles for Raise3D PRO 2 ONLY!
You can now print almost any abrasive material on your Raise3D PRO
Almost forever!
€ 69,00Select options
3DSolex Matchless 0.40mm for 2.85 – 1.75
Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output, completing prints faster. Alternatively, you can print cooler!
-
€ 14,00Select options
3DSolex Matchless 0.40mm for 2.85 – 1.75
Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output, completing prints faster. Alternatively, you can print cooler!
€ 14,00Select options
iconOnSale
UM3 – S5 Hardcore Black 40-60-80 Everlast
2 x Hardcores
6 x Standard ICE Nozzles: 3 x 0.40, 3 x 0.80
2 x EVERLAST Ruby Nozzles: 0.40 + 0.60
PRINT ALMOST ANY MATERIAL WITH RUBY!
Bought separately at 525,- Eur,
Kit ships with 2 cores:
Hardcore 0.40 + Hardcore 0.80
3 x 0.40 Nozzles
3 x 0.80 Nozzles
Kit ships with 2 Everlast Nozzles:
1 x 0.40mm Everlast
1 x 0.60mm Everlast (note.. ships with 0.60mm, not 0.80mm)
Many other sizes available!
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)
-
€ 499,00€ 444,00Add to basket
UM3 – S5 Hardcore Black 40-60-80 Everlast
2 x Hardcores
6 x Standard ICE Nozzles: 3 x 0.40, 3 x 0.80
2 x EVERLAST Ruby Nozzles: 0.40 + 0.60
PRINT ALMOST ANY MATERIAL WITH RUBY!
Bought separately at 525,- Eur,
Kit ships with 2 cores:
Hardcore 0.40 + Hardcore 0.80
3 x 0.40 Nozzles
3 x 0.80 Nozzles
Kit ships with 2 Everlast Nozzles:
1 x 0.40mm Everlast
1 x 0.60mm Everlast (note.. ships with 0.60mm, not 0.80mm)
Many other sizes available!
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)
€ 499,00 € 444,00Add to basket
UM2+ 5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby
This great kit consists of 5 nozzles, for the UM2+ / Matchless / Olsson / E3D:
0.25-0.40-0.60-0.80 ICE Brass nozzles + 0.40 Everlast Ruby
-
€ 143,00€ 99,00Add to basket
UM2+ 5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby
This great kit consists of 5 nozzles, for the UM2+ / Matchless / Olsson / E3D:
0.25-0.40-0.60-0.80 ICE Brass nozzles + 0.40 Everlast Ruby
€ 143,00 € 99,00Add to basket
Raise3D N2 Matchless Nozzles
We Are Not Kidding
FOR N2 Series Only.
This high tech nozzle will significantly increase plastic output.*
Alternatively, you can print cooler!*
We have customers finishing 16h prints in 4 hours.*
Less dripping, if any- varies with material.*
Surface treatment prevents “locking” with aluminium block.
-
€ 12,00 – € 82,00Select options
Raise3D N2 Matchless Nozzles
We Are Not Kidding
FOR N2 Series Only.
This high tech nozzle will significantly increase plastic output.*
Alternatively, you can print cooler!*
We have customers finishing 16h prints in 4 hours.*
Less dripping, if any- varies with material.*
Surface treatment prevents “locking” with aluminium block.
€ 12,00 – € 82,00Select options
SS 50 “ICE” – 0.50mm Nozzle
Helps preventing PLA from sticking to your nozzle Will not carry blobs of PLA or any other filament around your print! Super easy Cold Pull!
0.50mm size can have an advantage with certain difficult, fibrous filaments, less clogging.
Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use!
(Ill. image- actual image coming).
For UM2/ UM2+
-
€ 16,00€ 12,50Add to basket
SS 50 “ICE” – 0.50mm Nozzle
Helps preventing PLA from sticking to your nozzle Will not carry blobs of PLA or any other filament around your print! Super easy Cold Pull!
0.50mm size can have an advantage with certain difficult, fibrous filaments, less clogging.
Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use!
(Ill. image- actual image coming).
For UM2/ UM2+
€ 16,00 € 12,50Add to basket
The Ultimate 3D Nozzle shop
