UM2 Nozzles

Showing 1–12 of 16 results

0.10mm Sub Micro

 49,00

0.10mm Sub Micro

This is the World`s smallest Nozzle. They are individually drilled and checked, and very difficult to use.
For Experts Only. Needs geared feeder. (Bondtech, Iroberti/Meduza, UM2+).

YOU will NOT be able to use this item with an original UM2.

 49,00

0.15mm Micro Nozzle

 39,00

0.15mm Micro Nozzle

This is the World`s 2.nd smallest Nozzle. They are individually drilled and checked, and very difficult to use.
For Experts Only. Needs geared feeder. (Bondtech, Iroberti/Meduza, UM2+).

YOU will NOT be able to use this item with an original UM2.

 39,00

EVERLAST UM2+ Nozzles 0.25-0.80 mm

 69,00 74,00

EVERLAST UM2+ Nozzles 0.25-0.80 mm

Super hard and super fast nozzles for UM2+.

 

 69,00 74,00

RSB “ICE” SURFACE Nozzle 0.25-1.00

 12,00

RSB “ICE” SURFACE Nozzle 0.25-1.00

NEW Nozzle from 3D Solex!

Slippery “ICE” nozzle, with brass core. Optimized for surface prints. Max temp 275C.
First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls!

 12,00

RSB JET Nozzle 0.25-0.80mm

 8,00

RSB JET Nozzle 0.25-0.80mm

Standard Nozzle. High quality. Made in Norway.  If your print crashes, you cannot blame it on this nozzle, it is likely something else.

 8,00

SS 40 “ICE” – 0.40mm Nozzle

 16,00  12,50

SS 40 “ICE” – 0.40mm Nozzle

Helps prevent PLA sticking to nozzle Will not carry blobs of PLA or any other filament around your print!
Super easy Cold Pull!
Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use!
(Ill. image- actual image coming).
For UM2/ UM2+

 16,00  12,50

SS 50 “ICE” – 0.50mm Nozzle

 16,00  12,50

SS 50 “ICE” – 0.50mm Nozzle

Helps preventing PLA from  sticking to your  nozzle Will not carry blobs of PLA or any other filament around your print! Super easy Cold Pull!
0.50mm size can have an advantage with certain difficult, fibrous filaments, less clogging.
Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use!
(Ill. image- actual image coming).
For UM2/ UM2+

 

 

 16,00  12,50

UM2 1.0mm Matchless

 10,00 14,00

UM2 1.0mm Matchless

Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output.  Alternatively, you can print cooler!

 10,00 14,00

UM2 1.5mm Matchless

 14,00

UM2 1.5mm Matchless

Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output, completing prints faster. Alternatively, you can print cooler!

 14,00

UM2 0.25mm Matchless

 14,00

UM2 0.25mm Matchless

Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”.

 14,00

UM2 0.40mm Matchless

 14,00

UM2 0.40mm Matchless

Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output, completing prints faster. Alternatively, you can print cooler!

 14,00

UM2 0.60mm Matchless

 14,00

UM2 0.60mm Matchless

Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output, completing prints faster. Alternatively, you can print cooler!

 14,00