All sale products
  • New

0.050 HAIRLINE Nozzle (50 micron)

7072482000079
Rating 

This is the World`s  smallest Nozzle. They are individually drilled and checked, and very difficult to use.

For Experts Only. Needs geared feeder. (Bondtech, Iroberti/Meduza, UM2+).

YOU will also need:


0.25 Nozzle

0.15 Nozzle

0.10 Nozzle

New Bowden.

Experience.


YOU will NOT be able to use this item with an original UM2.

€169.00
Quantity

  • We will not share your information!!
We back our products with 2 year guarantee, except where noted, especially with consumable products. We will not share your information!! We back our products with 2 year guarantee, except where noted, especially with consumable products.
  • If your order is delayed more than 3 days from us, you will be notified!
If your order is delayed more than 3 days from us, you will be notified!
  • You can return any unused product within 30 days of purchase! You can return any unused product within 30 days of purchase!
  • You can always contact us to change the order! You can always contact us to change the order!
Description

This is the World`s smallest 3d printer nozzle. They are individually drilled and checked, and extremely difficult to manufacture.

These are difficult to use, and we recommend that you can print with a 0.25, 0.15 and 0.10 nozzle "blindfoldedly" before using this one. Prints at lower temp (190 - 205C), since the material stays long time inside. Do not change material type without "Cold Pulls" in between.

Use Cold Pull before and after every print. This cleans out the nozzle.


What is this nozzle used for?

- Kanji, Japanese art writing

- Custom PCB manufacture

- Miniature drone parts

- Miniature tools and gadgets

- Other use



World`s smallest drill is made with our 0.25mm nozzle. The 0.10. has the surface area (opening size) of only about 14% of a 0.25mm hole.


The Hairline 50 Micron nozzle has such a small hole that you can almost not see it.

A 0.40mm nozzle has a 15 times higher plastic output than the 0.10mm 3D Solex Micro. This nozzle will not work with an ungeared feeder like UM2 (not "+"), or without a high tech feeder likte Bondtech. Made in Norway by hand, using a Swiss "drill" and German tools.

https://www.youtube.com/watch?v=gTb9FtcpVoI

Product Details
7072482000079

Reviews

No customer reviews for the moment.

Write your review

0.050 HAIRLINE Nozzle (50 micron)

0.050 HAIRLINE Nozzle (50 micron)

This is the World`s  smallest Nozzle. They are individually drilled and checked, and very difficult to use.

For Experts Only. Needs geared feeder. (Bondtech, Iroberti/Meduza, UM2+).

YOU will also need:


0.25 Nozzle

0.15 Nozzle

0.10 Nozzle

New Bowden.

Experience.


YOU will NOT be able to use this item with an original UM2.

Write your review

You might also like

0.10mm Sub Micro

Review(s): 0

This is the World`s 2nd smallest Nozzle. They are individually drilled and checked, and very difficult to use.For Experts Only. Needs geared feeder. (Bondtech, Iroberti/Meduza, UM2+).YOU will NOT be able to use this item with an original UM2.

Price €49.00
More
In stock

0.15mm Micro Nozzle

Review(s): 0

This is the World`s 3.d smallest Nozzle. They are individually drilled and checked, and very difficult to use.For Experts Only. Needs geared feeder. (Bondtech, Iroberti/Meduza, UM2+).YOU will NOT be able to use this item with an original UM2.

Price €29.00
More
In stock
4 other products in the same category:

0.15mm Micro Nozzle

Review(s): 0

This is the World`s 3.d smallest Nozzle. They are individually drilled and checked, and very difficult to use.For Experts Only. Needs geared feeder. (Bondtech, Iroberti/Meduza, UM2+).YOU will NOT be able to use this item with an original UM2.

Price €29.00
More
In stock

RSB JET Nozzle 0.25-0.80

Review(s): 0

Standard Nozzle. High quality. Made in Norway.  If your print crashes, you cannot blame it on this nozzle, it is likely something else.

Price €8.00
More
In stock

SS 40 "ICE" - 0.40mm Nozzle

Review(s): 0

Helps prevent PLA sticking to nozzle Will not carry blobs of PLA or any other filament around your print!Super easy Cold Pull!Lasts even longer than stainless steel nozzles. For some users it will "payback" after first use!(Ill. image- actual image coming).For UM2/ UM2+

Price €12.00
More
In stock

RSB "ICE" Nozzles 0.25-0.80

Review(s): 0

NEW Nozzle from 3D Solex! Slippery "ICE" nozzle, with brass core. Optimized for surface prints. Max temp 275C.First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls!

Price €9.00
More
In stock