All sale products
  • On sale!
UM2+  5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby
  • UM2+  5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby

UM2+ 5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby

7072482001946
Rating 

This great kit consists of 5 nozzles, for the UM2+ / Matchless / Olsson / E3D:

0.25-0.40-0.60-0.80 ICE Brass nozzles + 0.40 Everlast Ruby

€99.00
€69.00 Save €30.00
Quantity

  • We will not share your information!!
We back our products with 2 year guarantee, except where noted, especially with consumable products. We will not share your information!! We back our products with 2 year guarantee, except where noted, especially with consumable products.
  • If your order is delayed more than 3 days from us, you will be notified!
If your order is delayed more than 3 days from us, you will be notified!
  • You can return any unused product within 30 days of purchase! You can return any unused product within 30 days of purchase!
  • You can always contact us to change the order! You can always contact us to change the order!
Description

This great kit consists of 5 nozzles, for the UM2+ / Matchless / Olsson Block / E3D:

0.25-0.40-0.60-0.80 ICE Brass nozzles + 0.40 Everlast Ruby

All the nozzles are brass nozzles. Except for the EVERLAST Ruby 0.40, they are coated with a hard and slippery material which makes cleaning a lot easier, and helps preventing plastic stick and being carried around the print.

These nozzles are standard nozzles except the Everlast which has the "Matchless" design of heating the filament.

This enables higher printing speeds and / or lower temperature, which again helps against dripping.

The ICE nozzles look a bit irregular on the surface due  to the treatment, but this quickly evens out and does not affect printing. The nozzles have a run-in period of 2 hours at 200C-225C , to harden, tempering the surface.

After that they should be used at mazh 265C.  Higher temperatures than 265C will destroy the treatment and the nozzle is the just like any other nozzle!

ONLY the Everlast is recommended for abrasive materials, the other nozzles will wear out quickly.

Product Details
7072482001946

Reviews

No customer reviews for the moment.

Write your review

UM2+  5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby

UM2+ 5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby

This great kit consists of 5 nozzles, for the UM2+ / Matchless / Olsson / E3D:

0.25-0.40-0.60-0.80 ICE Brass nozzles + 0.40 Everlast Ruby

Write your review

4 other products in the same category:

UM2 0.80 mm Matchless

Review(s): 0

Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output.  Alternatively, you can print cooler!

Price €15.00
More
In stock

RSB JET Nozzle 0.25-0.80

Review(s): 0

Standard Nozzle. High quality. Made in Norway.  If your print crashes, you cannot blame it on this nozzle, it is likely something else.

Price €8.00
More
In stock

SS 50 "ICE" - 0.50mm Nozzle

Review(s): 0

Helps preventing PLA from  sticking to your  nozzle Will not carry blobs of PLA or any other filament around your print! Super easy Cold Pull!0.50mm size can have an advantage with certain difficult, fibrous filaments, less clogging.Lasts even longer than stainless steel nozzles. For some users it will "payback" after first use!(Ill. image- actual image...

Price €12.00
More
In stock