All sale products
  • New
  • S5 - UM3 Hardcore
  • S5 - UM3 Hardcore

S5 - UM3 Hardcore 1.75 mm

Rating 

1.75mm Version!

Switch between 2.85 and 1.75 in a minute! Choice of Tri-X 40  (3 x 0.40 Nozzle) or 1 pcs 0.60mm Sapphire Everlast.

Hardcore  replacement of  up to 8 original Print Cores: - Nozzles: 0.10mm - 1.2mm.

Every nozzle can now be easily replaced! Micro nozzles and Stainless nozzles already in programme, fantastic new additional products coming up on the coming weeks! -

12 Month Guarantee on electronics, heater, temp sensor.

(Nozzles are consumables, but can now be changed easily and inexpensively!)

choose version
€225.00
Quantity

  • We will not share your information!!
We back our products with 2 year guarantee, except where noted, especially with consumable products. We will not share your information!! We back our products with 2 year guarantee, except where noted, especially with consumable products.
  • If your order is delayed more than 3 days from us, you will be notified!
If your order is delayed more than 3 days from us, you will be notified!
  • You can return any unused product within 30 days of purchase! You can return any unused product within 30 days of purchase!
  • You can always contact us to change the order! You can always contact us to change the order!
Description

The Hardcore is easily distinguishable, since the aluminium cooler is now BLUE .

This core ONLY works with 1.75mm filament. You must change bowden tube (included) for use.

The internal and external thermal properties now exceed those of the original block. The heater and temp sensor have better contact with the block. The mass is lower.

You must adjust printer/slicer to allow for 1.75mm filament.

We add 12 month guarantee*.

Hardcore ships with tools for nozzle change.


HardCore Nozzles available separately:

0.050mm ( 50 micron smaller than the world`s smallest )


0.10mm Sub Micro Nozzle Coated Brass ( world`s smallest)

0.15mm Micro Nozzle Coated Brass

0.25mm  Coated Brass + ICE

0.40mm  Coared Brass + ICE   (Filament does not stick, wear resistant surface)

0.50m STEEL +  ICE nozzle

0.60mm   Coated Brass + ICE

0.80mm  Coated Brass + ICE

1.00mm  Coated Brass  + ICE

Hardcore EVERLAST Ruby Sapphire Nozzles 

0.25mm

0.40mm

0.50mm

0.60mm

0.80mm

1.20mm

These are superhard nozzles, which print just as fast as the other non-steel nozzles, but will not be destroyed by abrasive filaments.

Additional information

All parts are surface hardened and of exceptional quality.

Each nozzle is a tiny little masterpiece and of a uniquely high build quality ( not 0.50 mm SS which is a standard nozzle). We are pressing the prices down to a reasonable level, you and your printer deserve it!

Warning: The nozzles will not fit any other block.

The HardCore can only use these nozzles. Mixing other nozzles/ blocks will destroy both block and nozzle. Guarantee does not cover destroyed Block / nozzle due to threading failure.



* Guarantee: The Core is classified as a consumable. This means that much like tires on a car it wears out quickly or slowly depending on use. However; we introduce a limited guarantee for our HardCore customers. Since we carefully verify every HardCore  we offer the following guarantee:  If you cannot yourself resolve HardCore problems you pay shipping to us + 49E, we fix ANY HardCore  problems. While at it, we install a new PTFE and tracked return shipping (15E). How can you loose?

The following part with 5 additional nozzles comes with a 12 month guarantee*.



A55DE5FD-569E-4239-97CB-DB6CD34ABC48L000



 
It replaces this, with the exception that it does take a little longer to replace a nozzle than to replace the whole core.



IMG_1312-300x188.png



 

 

Product Details

Specific References

ean13
7072482002226
Reviews

No customer reviews for the moment.

Write your review

S5 - UM3 Hardcore 1.75 mm

S5 - UM3 Hardcore 1.75 mm

1.75mm Version!

Switch between 2.85 and 1.75 in a minute! Choice of Tri-X 40  (3 x 0.40 Nozzle) or 1 pcs 0.60mm Sapphire Everlast.

Hardcore  replacement of  up to 8 original Print Cores: - Nozzles: 0.10mm - 1.2mm.

Every nozzle can now be easily replaced! Micro nozzles and Stainless nozzles already in programme, fantastic new additional products coming up on the coming weeks! -

12 Month Guarantee on electronics, heater, temp sensor.

(Nozzles are consumables, but can now be changed easily and inexpensively!)

Write your review

You might also like
4 other products in the same category:

S5 - UM3 Hardcore PVA/BB 1.75 mm

Review(s): 0

1.75mm Version! PVA BB.Switch between 2.85 and 1.75 in a minute! Ships with 3 pcs 0.40mm nozzles. Hardcore  replacement of  up to 8 original Print Cores: - Nozzles: 0.10mm - 1.2mm/ will also work for any other material not just PVA.Every nozzle can now be easily replaced! Micro nozzles and Stainless nozzles already in programme, fantastic new additional...

Price €225.00
More
In stock

Raise3D N2 Matchless Nozzles

Review(s): 0

We Are Not Kidding FOR N2 Series Only. This high tech nozzle will significantly increase plastic output.*Alternatively, you can print cooler!*We have customers finishing 16h prints in 4 hours.*Less dripping, if any- varies with material.*Surface treatment prevents "locking" with aluminium block.

Price €14.00
More
In stock

Prusa I3 Nozzle "Speed Doubler"

Review(s): 0

* This fantastic kit allows up to 30 cubic/mm per second by changing the Nozzle Only! Tools for safe changing of nozzles included!Achieve 30 cubic/mm per second!

Price €59.00
More
In stock