IMG_134217793BE5-6F72-4E81-AC0F-CA969C231E30L0001IMG_1256IMG_1285IMG_1294

UM3 HardCore Pro

 189,00 289,00

SOLD OUT UNTIL September 5th. See our retailers to buy it now!

1 pcs HardCore  replacement of  up to 8 original Print Cores: – Nozzles: 0.10mm – 1.2mm.

Every nozzle can now be easily replaced! Micro nozzles and Stainless nozzles already in programme, fantastic new additional products coming up on the coming weeks!

Ships July 14th: Buy from resellers, or place order in 1st week
July to get shipping July 14th.

– Replaceable PTFE coupler option.
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles and PTFE are consumables, but can now be changed easily and inexpensively!)

SHIPS WITH TRACKING

Clear
SKU: N/A Categories: ,

Description

The HardCore Pro is easily distinguishable, since the aluminium cooler is now red and the block has a hard plate finish. The internal and external thermal properties now exceed those of the original block. The heater and temp sensor have better contact with the block. The mass is lower.

The HardCore Pro is a drop-in replacement for the standard Print Core AA.

We add 12 month guarantee*.

HardCore Pro ships with tools for nozzle change and choice of nozzles:

HardCore Pro 2:  0.40 & 0.80mm nozzles.  (2 nozzles)

HardCore Pro 4: 0.25-0.40-0.60-0.80mm nozzles ( 4 in all)

Hard Core Pro 7:  (7 nozzles in all):

1 x 0.25 mm Coated Brass

2 x 0.40 mm Coated Brass  + “ICE” (Filament does not stick, wear resistant surface)

1 x 0.50 mm Stainless Steel “ICE“. (Filament does not stick, wear resistant surface)

1 x 0.60 mm Coated Brass

1 x 0.80 mm Coated Brass

1 x 1.00 mm Coated Brass

Optional extras:

 

Engineering High Temp (EHT) upgrade Hard Core EHT: 360 Celcius continuous.
(You can upgrade your existing Hard Core)
– Delayed

HardCore Nozzle kits available separately:

1x/4x  0.10mm Sub Micro Nozzle Coated Brass ( world`s smallest)
1x/4x  0.15mm Micro Nozzle Coated Brass
0.25mm  Coated Brass + ICE
0.40mm  Coared Brass + ICE   (Filament does not stick, wear resistant surface)
0.50m STEELn +  ICE nozzle
0.60mm   Coated Brass + ICE
0.80mm  Coated Brass + ICE
1.00mm  Coated Brass  + ICE

HardCore EVERLAST Ruby Sapphire Nozzles 

0.25mm
0.40mm
0.50mm
0.60mm
0.80mm
1.20mm

These are superhard nozzles, which print just as fast as the other non-steel nozzles, but will not be destroyed by abrasive filaments.

Additional information

All parts are surface hardened (not SS nozzle) and of exceptional quality.

Each nozzle is a tiny little masterpiece and of a uniquely high build quality ( not 0.50 mm SS which is a standard nozzle). We are pressing the prices down to a reasonable level, you and your printer deserve it!

Warning: The nozzles will not fit any other block.
The HardCore can only use these nozzles. Mixing other nozzles/ blocks will destroy both block and nozzle. Guarantee does not cover destroyed Block / nozzle due to threading failure.

* Guarantee: The Core is classified as a consumable. This means that much like tires on a car it wears out quickly or slowly depending on use. However; we introduce a limited guarantee for our HardCore customers. Since we carefully verify every HardCore  we offer the following guarantee:  If you cannot yourself resolve HardCore problems you pay shipping to us + 49E, we fix ANY HardCore  problems. While at it, we install a new PTFE and tracked return shipping (15E). How can you loose?

The following part with 5 additional nozzles comes with a 12 month guarantee*.

 

 

 

 

 

 

 

 

It replaces this, with the exception that it does take a little longer to replace a nozzle than to replace the whole core.

 

 

Additional information

Choose Version

HardCore Pro 2, HardCore Pro 4, HardCore Pro 7

No FAQ Found