S5 – UM3 Hardcore Tri-X
Hardcore Tri-X – ships with 3 nozzles in the same size!
Every nozzle can now be easily replaced! Micro nozzles and Everlast Sapphire nozzles available.
12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)
The Hardcore is easily distinguishable, since the aluminium cooler is now red and the block has a hard plate finish. The internal and external thermal properties now exceed those of the original block. The heater and temp sensor have better contact with the block. The mass is lower.
The Hardcore is a drop-in replacement for the standard Print Core AA.
We add 12 month guarantee*.
Hardcore ships with tools for nozzle change and 3 x 0.40 Nozzles
There are the following configurations available:
Hardcore Tri-X 25 : 3 x 0.25 mm Matchless nozzle.
Hardcore Tri-X 40 : 3 x 0.40 mm Matchless nozzle.
Hardcore Tri-X 50 : 3 x 0.50 mm Matchless nozzle.
Hardcore Tri-X 60 : 3 x 0.60mm Matchless nozzle.
Hardcore Tri-X 80 : 3 x 0.80mm Matchless nozzle.
Hardcore Tri-X 100 : 3 x 1.0 mm Matchless nozzle.
Hardcore Nozzle nozzles available separately:
0.10mm Sub Micro Nozzle Coated Brass ( world`s smallest)
0.15mm Micro Nozzle Coated Brass
0.25mm Coated Brass + ICE
0.40mm Coated Brass + ICE
0.50m STEEL + ICE nozzle
0.60mm Coated Brass + ICE
0.80mm Coated Brass + ICE
1.00mm Coated Brass + ICE
HardCore EVERLAST Ruby Sapphire Nozzles
These are superhard nozzles, which print just as fast as the other non-steel nozzles, but will not be destroyed by abrasive filaments.
All parts are surface hardened (not SS nozzle) and of exceptional quality.
Each nozzle is a tiny little masterpiece and of a uniquely high build quality ( not 0.50 mm SS which is a standard nozzle). We are pressing the prices down to a reasonable level, you and your printer deserve it!
Warning: The nozzles will not fit any other block.
The HardCore can only use these nozzles. Mixing other nozzles/ blocks will destroy both block and nozzle. Guarantee does not cover destroyed Block / nozzle due to threading failure.
* Guarantee: The Core is classified as a consumable. This means that much like tires on a car it wears out quickly or slowly depending on use. However; we introduce a limited guarantee for our HardCore customers. Since we carefully verify every HardCore we offer the following guarantee: If you cannot yourself resolve HardCore problems you pay shipping to us + 49E, we fix ANY HardCore problems. While at it, we install a new PTFE and tracked return shipping (15E). How can you loose?
The following part comes with a 12 month guarantee*.
It replaces this, with the exception that it does take a little longer to replace a nozzle than to replace the whole core.
|Dimensions||15 × 10 × 3 cm|
Tri-X 25, Tri-X 40, Tri-X 50, Tri-X 60, Tri-X 80, Tri-X 100