Search results: “matchless” – Page 2

Showing 13–24 of 27 results

Wanhao 0.40 – 0.80mm Matchless

 16,00

Wanhao 0.40 – 0.80mm Matchless

Wanhao Matchless  (1.75mm fil).  Multiply printing speed. Requires All Metal hotend upgrade. A fantastic nozzle!

 16,00

UM2 0.60mm Matchless

 14,00

UM2 0.60mm Matchless

Optimized for 3D Solex V3 Block. Backwards compatible with “Olsson Block”. This high tech nozzle will significantly increase plastic output, completing prints faster. Alternatively, you can print cooler!

 14,00

Prusa I3 Nozzle

 9,00 14,00

Prusa I3 Nozzle

* These fantastic Nozzles allow up to 30 cubic/mm per second by changing the Nozzle Only!

 9,00 14,00

Prusa I3 Nozzle “Speed Doubler”

 59,00

Prusa I3 Nozzle “Speed Doubler”

* This fantastic kit allows up to 30 cubic/mm per second by changing the Nozzle Only! Tools for safe changing of nozzles included!
Achieve 30 cubic/mm per second!

 59,00

S5 – UM3 Hardcore Tri-X

 189,00

S5 – UM3 Hardcore Tri-X

Hardcore Tri-X – ships with 3 nozzles in the same size!

Every nozzle can now be easily replaced! Micro nozzles and Everlast Sapphire nozzles available.

12 Month Guarantee on electronics, heater, temp sensor.
(Nozzles are consumables, but can now be changed easily and inexpensively!)

 189,00

UM2+ 5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby

 143,00  99,00

UM2+ 5- ICE Nozzle Kit w/ 0.40 EVERLAST Ruby

This great kit consists of 5 nozzles, for the UM2+ / Matchless / Olsson / E3D:
0.25-0.40-0.60-0.80 ICE Brass nozzles + 0.40 Everlast Ruby

 143,00  99,00

UM2+ Everlast DIAMOND Nozzle

 330,00

UM2+ Everlast DIAMOND Nozzle

DIAMOND tipped nozzle. We are supplying this nozzle to a German university.
Diamond has exceptional thermal properties, far outshining any other known mineral or metal.

 

 330,00

S5-UM3 Hardcore DIAMOND Nozzle

 330,00

S5-UM3 Hardcore DIAMOND Nozzle

DIAMOND tipped nozzle. We are supplying this nozzle to a German University.
Diamond has exceptional thermal properties, far outshining any other known mineral or metal.

 

 330,00

RSB “ICE” SURFACE Nozzle 0.25-1.00

 12,00

RSB “ICE” SURFACE Nozzle 0.25-1.00

NEW Nozzle from 3D Solex!

Slippery “ICE” nozzle, with brass core. Optimized for surface prints. Max temp 275C.
First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls!

 12,00

SS 50 “ICE” – 0.50mm Nozzle

 16,00  12,50

SS 50 “ICE” – 0.50mm Nozzle

Helps preventing PLA from  sticking to your  nozzle Will not carry blobs of PLA or any other filament around your print! Super easy Cold Pull!
0.50mm size can have an advantage with certain difficult, fibrous filaments, less clogging.
Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use!
(Ill. image- actual image coming).
For UM2/ UM2+

 

 

 16,00  12,50

SS 40 “ICE” – 0.40mm Nozzle

 16,00  12,50

SS 40 “ICE” – 0.40mm Nozzle

Helps prevent PLA sticking to nozzle Will not carry blobs of PLA or any other filament around your print!
Super easy Cold Pull!
Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use!
(Ill. image- actual image coming).
For UM2/ UM2+

 16,00  12,50

I2K

 15,00

I2K

One of our coolest items!  Sold to universities and matter hackers world wide! This product is manufactured from a US-made engineering plastic. It serves as an insulator between the PTFE coupler and the hot end. With it you can print at 295C “all day long”.

 15,00